Ferial water treadmills consist of several parts, the spaces and infrastructure facilities required for each of which are explained below.
–
Treadmill Box: Ferial’s human blue treadmill boxes are currently manufactured in two models.
The X2000 model is 85 cm wide, 170 cm long, and 170 cm high.
The SX2000 model is produced with a width of 95 cm, a length of 210 cm and a height of 200 cm.
In the SX series, for ease of movement, the treadmill is made in several pieces and to move it requires a width less than the completed model, equivalent to 85 cm, and 170 cm in length.
In both models introduced, at least a 50 cm margin is required around it; the next thing is to have a shoebox where the box is located, which is better if there is one, but there is no requirement for this.
– Water storage tank: Water tanks come in various shapes and sizes, which can be chosen depending on the installation location; however, access to a cold water line is essential to fill the tank; a drain or sewage outlet is also required for times when the tank water needs to be replaced.
– Water treadmill installations: Each water treadmill has four pumps that are used to fill and drain water, as well as a heating and filtration system; this equipment can be installed in different spaces and placed according to the existing environment.
– Ozone generator: An ozone generator is used for chemical water purification, which should be installed at the highest point in terms of height, and preferably ventilation is required at its installation location.
– Heating system: Heating of Ferial water treadmills can be implemented in three ways; the first method is to use a gas water heater, which requires a city gas flame and a suitable chimney.The next method is for places that either use a package for the heating system or have a motor home, in which case a special exchanger is used to heat the treadmill water.
And the last method is to use an electric water heater, which is not cost-effective due to the high cost of electricity compared to gas; but if necessary, this method can also be applied to places that do not have city gas.
– Electrical panel: The electrical panel required for water treadmills is sent by the company with the device, which only requires a single-phase 25-amp power input.
